One-stop fibre supply for regional FTTH operators
Every layer of your FTTH build, from one supplier
Feeder, distribution, aerial, drop and in-building — we make all of it, ship it as one mixed load, and tell you what to specify before you ask for a price. Built for regional ISPs, not only tier-1 carriers.
For regional FTTH operators
Which cable goes where
A full FTTH build has six layers and they do not take the same cable. Below is what we supply for each, and what to pin down before you ask for a price.
Applications
The fibre itself
Everything else is packaging. Get the fibre grade right first — it decides your loss budget and how tight a bend the install crew can get away with.
G.652.D for the outside plant; G.657.A1 or A2 anywhere the route gets tight — risers, wall boxes, pre-terminated assemblies.
Applications
Feeder — OLT to the primary splitter
High fibre count, long runs, ducted or direct-buried. This is the section you least want to dig up again, so armour and fibre count both want headroom.
Fibre count including spare (plan 30–50% above day-one demand), duct or direct burial, and whether rodents are a known problem on the route.
Applications
Distribution — splitter to street or building
Mid count, shorter runs, more joints. Handling matters more here than raw strength: your crews will be opening these all day.
Fibre count per branch, duct versus aerial, and the closure type you standardise on — tube count has to match it.
Applications
Aerial spans and shared poles
Where trenching is not worth it. If you are sharing poles with live power lines, the cable has to be all-dielectric — no metal anywhere.
Longest span in metres, whether the poles carry live LV/MV lines, and who owns them. Span length decides the construction, not the fibre count.
Applications
Drop — the last span to the subscriber
The highest volume item in any FTTH build and the one your install crews touch most. Strip time per drop, multiplied by thousands of homes, is real money.
Aerial or underground, span length, 1 / 2 / 4 core, and whether your crews field-connectorise or splice on site.
Applications
In-building — riser and floor distribution
Indoors in the EU this is where the fire regulations bite. Getting the class wrong is not a price difference, it is a failed inspection.
The CPR Euroclass your project specifies (Eca / Dca / Cca / B2ca) — it changes the sheath compound and therefore the lead time. Tell us at enquiry stage.
Applications
Tunnels, shafts and other awkward places
Rail tunnels, mine roadways, plant rooms. Fire performance and mechanical protection together, usually against a specification someone else wrote.
The exact standard the specification cites, plus whether metal is allowed in the construction at all.
Product range
Built to published specifications
Every model ships with a full datasheet. Specifications below are the ones we test against, not marketing figures.
Single-Mode Optical Fibre
G. 652.D single mode optical fiber is designed specially for optical transmission systems operating over the e...
Double Jacket All-Dielectric Self-Supporting (ADSS) Optical Fiber Cable
ADSS aerial optical fiber cable is a kind of combined optical cable made by winding the optical fiber bundle o...
Stranded Loose Tube APL-Armoured Cable
The workhorse outdoor construction: gel-filled PBT loose tubes stranded around a steel-wire central member, al...
View details →
Stranded Loose Tube Steel-Tape Armoured Cable
Same stranded loose-tube core as GYTA, but armoured with corrugated steel tape (PSP) instead of aluminium. Cho...
View details →
Figure-8 Self-Supporting Aerial Cable
A figure-8 profile with the steel messenger built into the sheath, so the cable goes up in one pass — no separ...
View details →
ASU All-Dielectric Self-Supporting Cable
All dielectric structure, resistant to electromagnetic interference Small diameter , light weight, cost-effect...
View details →
GJXFH Drop Cable
FTTH drop fiber optic cable is a very good fiber optic solution to the last mile of the home. CROFC provides d...
Anchor Clamps for Round ADSS / Drop Cables
Dead-end clamps for round fibre cables on access networks with spans up to 100 m. A pair of wedges inside the...
View details →Standards and compliance
Standards and compliance
PRODUCT ECOSYSTEM
From fibre to the final connection
Optical Fibre
Single-mode fibre drawn in-house to ITU-T G.652.D and G.657, supplied on standard shipping spools or cabled to your specification.
View detailsOptical Fibre Cable
Outdoor, aerial, duct, direct-buried, FTTH drop and mining cables from 1 to 288 fibres. Every construction ships with a full mechanical and environmental datasheet.
View detailsCable Accessories & Pole Hardware
Anchor, tension and suspension clamps, pole brackets, stainless band strap — everything that holds ADSS, figure-8 and FTTH drop cables on the pole. Matched to our cable diameters.
View detailsFTTA & Quick ODN
Pre-connectorised drop cables, hardened field connectors and IP65/IP68 terminal boxes for plug-and-play FTTH — no splicing on the pole. Plus outdoor jumpers for fibre-to-the-antenn...
View detailsNews
Latest from the plant
Ontario Fibre Growth Ranking Highlights Northern Expansion Plans
A November 13, 2026 announcement from PomeGran Inc. reports a top ranking in fibre-centric digital infrastructure among...
Read more →Fiber Access and Optical Transport Briefing: 50G PON Trial and Statewide Backbone Modernization
Two separate developments reported on November 11, 2026: Telia Estonia is running a 50G PON proof of concept with Adtran...
Read more →Fiber Procurement Briefing: Redundant Networks and Hollow-Core Trials
FirstDigital reported expanding its redundant fiber network to more businesses in Utah and Arizona on November 10, 2026....
Read more →